Handmade with high-quality components these are a step up from cheap, wobbly, crackling adaptors. They have been built to fulfil some very specific needs.
First, connecting the (mono) speaker and auxiliary outputs of the Koma Field Kit to devices and signal splitters with stereo jacks. I've also been using my Koma with various vibration speakers and complex signal paths and these adaptors have become absolutely invaluable to my workflow. They would also work anywhere connecting stereo jacks to mono-sockets is causing problems. One end has a mono jack and the other end has a stereo socket with the tip and ring (left and right) intentionally shorted so mono signals flow correctly through a stereo connection.
Second, I've been using various small amps, vibration transducer, and contact mic setups. Sometimes equipment expects a stereo input but I'm using a mono tipped component resulting in only the left or right channel working. Using these adaptors I can mono-ize the connection with the mono signal following through both left and right channels. One and has a stereo jack with the tip and ring (left and right) intentionally shorted and the other has a stereo socket wired for mono only. With this combination, a mono signal flows to both channels of a stereo input.
You can choose between Mono Jack to Stereo Socket Adaptor and Mono-ized Stereo Jack to Stereo Socket Adaptor options when adding to cart.
With a 10cm shielded cable length, and high-quality connectors these are simple, compact, and utilitarian.
Chainlock [Full DIY Ciat-Lonbarde Build]
Sold Out
Nobsrine B-stock
Sold Out
Spikering [Full DIY Ciat-Lonbarde Build]
Sold Out
Lil Sidrassi Noise Touch-Synth in Radio Enclosure w/ Built-In Speaker and Line-Out
Sold Out
Switched Lil Sidrassi [Full DIY Ciat-Lonbarde Build]
Sold Out
Nobsrine [Full DIY Ciat-Lonbarde Build]
Sold Out
Music Thing Modular Magnetophon [Eurorack Module]
Sold Out
Music Thing Modular Mikrophonie [Eurorack Module]
Sold Out
FC Power [DIY Eurorack Power Module]
Sold Out
Spiral Touchies [5 pack]
Sold Out
Spiral Touchies [10 pack]
Sold Out
Twangle Touchies [5 pack]
Sold Out
Twangle Touchies [10 pack]
Sold Out
A4 Print edition - Contingent Piezo Preamp - Paper Circuit and Manual
Sold Out
Sensors
Sold Out
Wired Touchies [5 pack]
Sold Out
Wired Touchies [10 pack]
Sold Out
APCS [Full Meng Qi/Ciat Lonbarde Build]
Sold Out
Lil Sidrassi Noise Touch-Synth in Radio Enclosure w/ Built-In Speaker and Line-Out
Sold Out
DDDm2 [Full Meng Qi/Ciat Lonbarde Build]
Sold Out
Rollz-5 Paper Prototype [Ciat Lonbarde Build]
Sold Out
Ciat-Lonbarde Esoterica Spikering PCB
Sold Out
Ciat-Lonbarde Esoterica Chainlock PCB
Sold Out
Ciat-Lonbarde Nobsrine PCB
Sold Out
Spiral Touchies [Prototype]
Sold Out
Contact Microphone [2m 1/4" plug]
Sold Out
Contact Microphone [1m 3.5mm plug]
Sold Out
Contact Microphone [5m 1/4" plug]
Sold Out
Mini Vibration Speaker [1m 3.5mm plug]
Sold Out
Mini Vibration Speaker [2m 3.5mm plug]
Sold Out
Tripping on Wires Sheffield, UK
Tripping on Wires is a home for DIY Audio Electronics. Specialising in Contact Microphones, Miniature Vibration Speakers, and experimental circuit builds.
